The following notice has been issued by the manufacturer:
The following notice has been issued by the manufaacturer:
IMPORTANT PRODUCT SAFETY NOTICE
Cosatto ALBANY 3 in 1 Cot bed
As part of an ongoing program of continual product assessment, a potential safety concern has been identified relating to the importance of retaining and re-fitting the 2 pre-fitted security screws on the ALBANY cot bed in 'Nut' and 'Cream' finish.
When the cot bed is converted from a cot to a junior bed the 2 security screws need to be removed to allow each of the upper and lower bed end sections to separate.
IMPORTANT: If the junior bed is subsequently converted BACK to a cot – for a second child or for a friend or relative's child, for example – each of the security screws MUST be re-fitted.
If the security screws are NOT re-fitted, it is possible to create a gap between the lower and upper cot bed end sections if the cot is moved or lifted for any reason. This could cause the possibility of injury to parent or child. It is also possible that, in some cases, partial disassembly of the drop side mechanism could occur, rendering the cot unsafe.
If the cot bed is converted to a SOFA, as stated in the instructions, it is also important that each of the security screws is re-fitted.
We have also produced an addendum to the original instruction leaflet for your further guidance (below).
Should you require any additional screw sets or need any further assistance, please do not hesitate to contact us directly via 0871 977 3900 (Option 1), via email at techhelp@cosatto.com or write to us at the address below.
We have taken this action to ensure the safety and wellbeing of our customers and apologise for any inconvenience this may cause.
Cosatto Ltd, Bentinck Street, Farnworth. Bolton, Lancashire BL4 7EP
© 2025 itsa Ltd.